Tycon Wireless Outdoor Point to Point Bridge EZBR-0214+ 2.4GHz with 14dBi MIMO Antennas and 250mW

EZBR-0214+

Tycon Power Systems
Tycon Wireless outdoor point to point bridge EZBR-0214+ with two 2.4GHz 14dBi MIMO antennas and two PoE power inserters


Product Highlights
  • The EZ-Bridge-LT+ is a high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec
  • It complies with the 802.11g and n standards to insure interoperability
  • The EZ-Bridge-LT+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight
  • It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access
  • Multiple EZ-Bridge-LT+ units can be connected in a mesh configuration to allow interconnecting more than two sites
  • Model#: EZBR-0214+

    Sku: IT3571.2908.103844



    MSRP: $249.99

    In Stock

    Your Price: $207.95




    The EZ-Bridge®-LT+ is a high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec. It complies with the 802.11g and n standards to insure interoperability.

    The EZ-Bridge®-LT+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. 

    It supports multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge®-LT+ units can be connected in a mesh configuration to allow interconnecting more than two sites.

    The EZ-Bridge® LT+ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 14dBi 802.11gn MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Cat5e rated POE (Power Over Ethernet) power inserters and 24VDC auto-ranging power supplies. 

    Power over Ethernet: Antennas can be mounted up to 100meter (300’) from the power inserter.

    No driver needed. Pre-configured at the factory for automatic peer to peer communications.

    Customer needs to supply CAT5 cabling between the power inserter and the antenna and between the power inserter and his computer, router or switch.

    • Data Rates 2.4Ghz 802.11n: up to 300Mbps / 2.4 GHz 802.11g: up to 54Mbps
    • Standards IEEE802.11g/n, 802.11a/n, 802.3, 802.3u
    • Power Supply: 100-240VAC 50/60Hz 
    • EZ-Bridge®: 12VDC to 24VDC Passive PoE
    • RF Frequency Band: 2400 ~ 2497 MHz
    • Antenna 2.4GHz 14dBi MIMO Panel Antenna, 35deg Beamwidth, >20dB front to back
    • Average Power Consumption: 4W
    • Operation Mode – Bridge or Router Point to Point Bridge, Access Point, Access Point WDS, Client, Client WDS
    • Interface 10/100Mbps RJ-45 LAN Port x 2
    • Antenna Physical Dimensions (L x W x D) 314mm x 187mm x 65mm 12.4” x 7.3” x 2.5”
    • Complete System Weight 3 kg (7 lbs)
    • Operating Temperature -30°C to +70°C (-22°F to 158°F)