Mimosa Backhaul B24 point-to-point 24 GHz, 1.5 Gbps capable, 33 dBi, 4x4:4 MIMO
Model#: B24
Sku: IT2687
MSRP: $975.00
In Stock
Your Price: $959.99
MODEL: B24
The Mimosa B24 point to point (PTP) backhaul radio delivers up to 1.5Gbps of aggregate speed in the less crowded and unlicensed 24GHz frequency band. By dynamically adjusting bandwidth based on upstream and downstream demand, the B24 efficiently delivers the most usable bandwidth possible with only 1ms latency, to meet modern internet traffic needs. The Mimosa B24 is revolutionizing the wireless industry, satisfying the needs of customers in multiple applications and verticals.
Product Applications
- Fixed Wireless Broadband Backhaul
- Business and MDU Rooftop Connections
- Campus Building Interconnecting
- Video Surveillance and WiFi Hotspot Distribution
- Smart City Connectivity
Product Features
- Gigabit Ethernet: 10/100/1000-BASE-T
- Fiber Capable: Supports SFP interface for fiber operation
- Ethernet Redundancy: Dual-Link failover; Does not support simultaneous Ethernet + fiber operation
- Dual Protocol Operation: 2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256QAM
- Management Services: Mimosa cloud monitoring and management SNMPv2 & Syslog monitoring HTTPS HTML5 based web UI (2.4GHz Wi-Fi management module no longer available as of February 2021)
- Smart Spectrum Management: Active scan monitors/logs ongoing RF interference across channels with no service impact; Dynamic auto-optimization of bandwidth, power, and modulation
- Security: 128-bit AES PSK with hardware acceleration
- QoS: Supports 4 pre-configured QoS levels
- GPS Location: GNSS-1 (GPS + GLONASS)
- Collocation Synchronization: 1PPS GPS TX/RX synchronization for collocated co-channel radios; Adjustable up/downstream bandwidth ratio
Specifications B24
| Gigabit Ethernet | 10/100/1000-BASE-T |
| Fiber Capable | Supports SFP+ interface for fiber operation |
| Ethernet Redundancy | Dual Link failover; Does not support simultaneous ethernet + fiber operation |
| Security | 128-bit AES PSK with hardware acceleration |
| QoS | Supports 4 pre-configured QoS levels |
| GPS Location | GNSS-1 (GPS + GLONASS) |
| Performance | |
| Max Throughput | Up to 1.5 Gbps IP aggregate UL/DL |
| Max PHY rate | 1.7 Gbps PHY |
| Low Latency | <1 ms |
| Supported MAC | TDMA, TDMA-FD |
| Radio | |
| MIMO and Modulation | 4x4:4 MIMO OFDM up to 256 QAM |
| Bandwidth | Single or dual channel; 20/40/80 MHz channel width |
| Channel Spacing | Single channel allows 5 MHz channel spacing; Dual channel allows separate, no-overlapping 5 MHz spacing increments |
| Frequency Range | 24.05 - 24.25 GHz worldwide support; Operating range is 24.07 - 24.23 GHz |
| EIRP | ~20 dBm (CE) ~33 dBm (FCC/IC) ~37 dBm (other regions) |
| Min Output Power | -20 dBm |
| Power Increment Level | 1 dB |
| Sensitivity (MCS0) | -84 dBm @ 80 MHz -87 dBm @ 40 MHz -90 dBm @ 20 MHz |
| Antenna | |
| Gain | 33 dBi |
| Beamwidth (3dB) | 3.0º |
| Elevation Adjust | +-2.5º azimuth mechanical adjust+-15º elevation mechanical adjust |
| Front to Back Ratio | >30 dB |
| Cross-Polar Isolation | >20 dB |
| Polarization | Dual-linear (slant 45º) |
| Power | |
| Max Power Consumption | 19.5 W |
| System Power Method | 48V DC 802.3at compliant |
| System Lightning & ESD Protection | 6 kV |
| PoE Power Supply | Passive POE compliant, 50V 1.2A power over ethernet (included) |
| Environmental | |
| Outdoor Ingress Protection Rating | IP67 |
| Operating Temperature | -40°C to +55°C (-40°F to 131°F) |
| Operating Humidity | 5 to 100% condensing |
| Operating Altitude | 4,420 m (14,500’) max |
| Shock & Vibration | ETS 300-019-2-4 class 4M5 |
| Regulatory and Compliance | |
| Approvals | FCC 15.249 IC RSS210 ETSI EN 300-440 V2.1.1 CE |
| RoHS Compliance | Yes; WEEE |
| Safety | EC/EN/ 60950-1 |
| Physical | |
| Dimensions | Height: 260 mm (10.24”) |
| Width | 260 mm (10.24”) Depth: 134 mm (5.3”) without bracket; 252 mm (9.9”) with bracket Weight: 2.76 kg (6 lbs) including mount |
| Enclosure Characteristics | Outdoor UV stabilized plastic; Powder-coated, aluminum mounting panel |
| Wind Survivability | 200 km/h (125 mph) |
| Wind Loading | 12.52 kg @ 160 km/h (27.61 lbs @ 100 mph) |
| Mounting | Precision lightweight aiming pole mount with +-15º elevation and +-2.5º horizontal adjustment screws |
| Network Interfaces | Gigabit ethernet (RJ45) and gigabit fiber (SFP cage); Operation modes: Hot standby |
Datasheet
