The ePMP 2000 Access Point System consists of a high performance, GPS Synchronized Access Point Radio with Intelligent Filtering, a new compact high performance Access Point Antenna and an optional Smart Beamforming Antenna. Cambium Networks ePMP has set the standard for high-performance, scalability, and reliability in harsh interference environments all at a compelling price.
• Frequency Reuse: Supports GPS Synchronization and SM Transmit power control to allow for Frequency Reuse
• Unmatched Performance and Scalability: With the efficient Cambium MAC protocol and advanced air-fairness scheduler up to 120 simultaneously active Subscriber Modules can be served without performance degradation.
• Industry-Leading Interference Tolerance: The Intelligent Filtering capability on the Receive side makes the ePMP 2000 immune to the effects of strong off-channel interferers and on the Transmit side serves to reduce off-channel noise for better radio co-location.
Cambium Networks has deployed more than five million radios around the world achieving unparalleled degrees of scalability. Based on this vast experience, Cambium Networks has designed an antenna solution that enables network operators to increase the spectral efficiency and scale of their ePMP point-to-multipoint (PMP) distribution access networks.
Wireless Service Providers deploying networks in 5 GHz spectrum will find this sector antenna for 90° and 120° applications especially well-suited for high-density networks requiring frequency re-use and wide-band spectrum coverage.
Frequency Reuse: Designed for ABAB channel re-use (two channels covering four sectors), the sector antenna has 35 Db front to back ratio including a wide aperture in the rear-facing direction.
Channel Flexibility: Consistent gain from 4.9 to 6.0 GHz allows the operator to select a channel anywhere in the band and achieve the expected performance.
Consistent Coverage: Excellent null fill capabilities of the antenna allow for broad geographical coverage within a sector even near the base of the tower and the edges of the sector.
Designed for the Installer: Small compact design, integrated ePMP radio mount and GPS antenna integration.
Predictable Performance: The sector antenna is integrated into Cambium Networks LINKPlanner. The 3D model shows coverage at all elevations and across the azimuth.
Channel Spacing: Configurable on 5 MHz increments
Frequency Range: 5150 - 5970 MHz (exact frequencies as allowed by local regulations)
Channel Width: 5 | 10 | 20 | 40 MHz
MAC (Media Access Control) Layer: Cambium Proprietary and optionally standard 802.11n
Physical Layer: 2x2 MIMO/OFDM
Ethernet Interface: 100/1000BaseT, rate auto negotiated, 802.3at compliant
Powering Methods Supported: 56 V PoE (included), standard 802.3at PoE Supply, or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter
Nominal Receive Sensitivity (w/FEC) @ 20 MHz Channel: MCS0 = -93 dBm to MCS15 = -69 dBm (per branch)
Nominal Receive Sensitivity (w/FEC) @ 40 MHz Channel: MCS0 = -90 dBm to MCS15 = -66 dBm (per branch)
Modulation Levels (Adaptive): MCS0 (BPSK) to MCS15 (64QAM 5/6)
GPS Synchronization: Yes, via internal GPS or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter
Quality of Service: Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority
Antenna: Sector Antenna (C050900D021A) Availabile
Transmit Power Range: 0 to +30 dBm (combined, to regional EIRP limit) (1dB interval)
Sector Antenna Connection: 2 x 50 ohm, RP (Reverse Polarity) SMA
Beamforming Antenna Connection: 2 x 50 ohm, RP (Reverse Polarity) SMA, DC Coupled (powering antenna)
GPS Antenna Connection: 1 x 50 ohm, RP (Reverse Polarity) SMA
Surge Suppression: 1 Joule Integrated
Temperature: -30 C to +55 C (-22 F to +131 F)
Power Consumption: 20 W Maximum
Input Voltage: 44 V to 59 V
Weight: 0.7 kg (1.5 lbs) without brackets
Dimensions (L x W xH): 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 in) without brackets
(1) ePMP 2000
(1) Gigabit PoE
(1) US Plug
(1) GPS Antenna
(2) Pole Clamps
(1) Environmental Cover
(2) Mounting Brackets
Frequency Range: 4.9GHz to 5.97GHz
3 dB Beamwidth - Azimuth: 90 degrees
6 dB Beamwidth - Azimuth: 120 degrees
3 dB Beamwidth - Elevation: 6 degrees
Electrical Downtilt: -2 degrees
Polarization: Horizontal and Vertical
Port-to-Port Isolation: > -30 dB
Front-to-Front Ratio: 35 dB
Maximum Input Power: 5 W
Input Impedance: 50 ohms
Mounting Connectors: 2 x RPSMA
Mounting Hardware: Included for mounting to mast diameters 2" to 4" (5 cm to 10 cm), -10 to +5 degree tilt, Hardware included to connect ePMP access point to back of antenna body
Physical Dimensions (Antenna Body): 23.4" (H) x 6.2" (W) x 4.3" (D) (584 mm x 157 mm x 110 mm)
Physical Dimensions (with ePMP 1000 Access Point): 23.4" (H) x 6.2" (W) x 5.9" (D) (593 mm x 157 mm x 150 mm)
Weight: Antenna Body: 8.8 lbs. (4.0 Kg). With ePMP 1000 Access point and Mounting Brackets: 14.6 lbs. (6.6 Kg)
Radome Material: UV Protected ABS
Operating Temp: -40°C to 60°C (-40°F to 140°F)
(1) ePMP 5GHz 90/120° Sector Antenna
(2) Pole Brackets
(2) Front Mast Clamps
(2) Rear Mast Clamps
(4) M8x160 Bolts
(4) M8x12 Screws
(8) M8 Nuts
(1) Antenna Body
(1) ePMP 1000 Holder
(1) ePMP 2000 Sector Mount
(1) Environmental Cover
(2) RP-SMA Cables