Ubiquiti UniFi AC SHD UAP-AC-SHD-US Pre-Configured (4-Pack) Wave 2 Dual Band Access Point up to 2000 Users UniFi Switch Managed PoE+ US-8-150W Gigabit 8-Port SFP 150W - Ready to Install


Ubiquiti UniFi AP AC UAP-AC-SHD Pre-Configured Wave2 Dual-Band 2000 Users 4-pack w/ Switch US-8-150W


Sku: IT2103.6493.136547

MSRP: $2,699.99

Out of stock

Your Price: $2,299.00

Model: UAP-AC-SHD-US (4 Units)

Pre-configured / Ready to Install

Unifi SHD Access Point AC High Density Dedicated Security Radio

Deploy UniFi AC HD AP in high-density environments requiring maximum wireless performance. The UniFi AC HD AP features simultaneous dual-band, 4x4 MU-MIMO technology and convenient 802.3at PoE+ compatibility. The Wave 2 MU-MIMO technology allows the AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience. The UniFi AC HD AP is the first UniFi 802.11ac Wave 2 AP. It combines the performance increases from MU-MIMO technology and the use of 4x4 spatial streams to deliver up to 125% greater performance than a typical Wave 1 AP.

  • Radio Hardware Acceleration

Independent 2.4 GHz and 5 GHz dedicated hardware offload for maximized multi-user throughput and reduced latency.

  • CPU Hardware Acceleration

 Dedicated hardware offload for QoS, guest control, and client management

  • Optimized for MU-MIMO

Antenna system optimized for 802.11ac Wave 2 MU-MIMO beamforming.



Model: US-8-150W

UniFi Switch 8-150W Managed PoE+ Gigabit Switch with SFP

The fanless UniFi Switch delivers quiet yet powerful performance with its 10 independent switching ports. Sharing a total of 150W PoE, eight Gigabit Ethernet ports offer 802.3af/at PoE+ or 24V passive PoE, and two SFP ports offer optical connectivity.

  • Versatile Port Configuration

Eight Gigabit RJ45 ports offer different power output options: auto-sensing IEEE 802.3af/at PoE/PoE+ and 24V passive PoE, and two SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.

  • Wall Mounting

The included Mounting Accessories support any orientation wall-mount and desk/shelf mounting.                                                  

  • Advanced Enterprise Switching

The UniFi Switch supports 802.1X authentication, dynamic and static VLAN tagging, port isolation, storm control, and guest control.

Model: UAP-AC-SHD-US (4 Units)

• Dimensions: 220 x 220 x 49.1mm (8.66 x 8.66 x 1.89")
• Weight: 700g (1.54lbs)
• Weight w/ Mounting Kits: 830g (1.83lbs)
• Networking Interface: (2) 10/100/1000 Ethernet Ports
• Buttons: Reset
• Power Method: Passive Power over Ethernet (48V), 802.3at PoE+ Supported
• Supported Voltage Range: 44 to 57VDC
• Power Supply: 48V, 0.5A PoE Gigabit Adapter
• Power Save: Supported
• Maximum Power Consumption: 17W
• TX Power:
     2.4GHz: 6-25dBm
     5GHz: 6-25dBm
• Antennas:
     2.4GHz: (2) Dual-Port, Dual-Polarity Antennas, 3dBi each
     5GHz: (2) Dual-Port, Dual-Polarity Antennas, 4dBi each
• Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2
• Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• BSSID: Up to Four per Radio
• Mounting: Wall/Ceiling (Kits Included)
• Operating Temperature: -10 to 70°C (14 to 158°F)
• Operating Humidity: 5 to 95% non-condensing
• Certifications: CE, FCC, IC

Advanced Traffic Management 
• VLAN: 802.1Q
• Advanced QoS: Per-User Rate Limiting
• Guest Traffic Isolation: Supported
• WMM: Voice, Video, Best Effort, and Background
• Concurrent Clients: 500+

Model: US-8-150W

  • (8) Gigabit RJ45 Ports
  • (2) SFP Ports
  • Non-Blocking Throughput: 10 Gbps
  • Switching Capacity: 20 Gbps
  • Forwarding Rate: 14.88 Mpps
  • Maximum Power Consumption: 150W
  • Supports PoE+ IEEE 802.3at/af and 24V Passive PoE
  • Quiet, Fanless Operation
  • Rackmountable with Rack-Mount Brackets (Included)
  • Desktop-Mountable (Do not physically stack the US-8-150W.)
  • Networking Interfaces: (8) 10/100/1000Mbps RJ45 Ethernet Ports / (2) 1 Gbps SFP Ethernet Ports
  • Management Interface: Ethernet In-Band