Ubiquiti NanoStation M NSM5 5GHz 16dBi 2x2 MIMO AirMax CPE (4-Pack) + Ethernet Surge Protector ETH-SP ESD for Outdoor Devices (4-Pack)

NSM5x4+ETH-SPx4

Ubiquiti
Ubiquiti NanoStation M5 NSM5 5GHz 16dBi Hi Power 2x2 MIMO AirMax CPE (4-Pack) + Ethernet Surge Protector ETH-SP ESD for Outdoor Devices (4-Pack)

Model#: NSM5x4+ETH-SPx4

Sku: IT1688.4694.792347



MSRP: $449.99

Out of stock

Your Price: $399.95


  • NSM5 (4-Pack)

The NSM5 NanoStation5 Broadband Outdoor Wireless CPE Router from Ubiquiti Networksfeatures a broadband wireless CPE technology, hi-gain two antenna system, advanced radio architecture, and firmware technology allowing throughput, stability, and capacity performance. The NanoStation5 is a reliable solution for high performance and can work in extreme temperature and weather conditions.

NanoStation5 utilizes Adaptive Antenna Polarity technology, which can statically or dynamically switch antenna polarities to optimize your connections. The AirOS is an intuitive, versatile Ubiquiti -firmware technology that is included with NanoStation5. It is designed to require no training to operate. Behind the user interface is a powerful firmware architecture which enables high-performance outdoor multi-point networking.

  • Versatile Application Use: The NanoStation M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE.
  • Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running airMAX sector antenna's and Rocket M5's. 
  • Next-Gen Antenna Design: 11dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor.
  • Dual Ethernet Connectivity: A secondary Ethernet port with software enabled POE output for seamless IP Video integration.
  • Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. 
  • 802.3af 48V Compliant:  Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. 

 

  • ETH-SP (4-Pack)

The Ubiquiti Networks Ethernet Surge Protector safeguards your outdoor non-PoE and PoE-based systems from voltage threats such as surges and electrostatic discharge events, which can render an entire network system inoperable. This protector is suitable for use with surveillance cameras, access points, and other Ethernet-equipped devices. Ubiquiti Networks has designed it with two surge-protected Ethernet ports that support Gigabit connection speeds. Furthermore, an external housing guards the Ethernet ports along with the surge protector from outdoor elements.

Introducing the Ethernet Surge Protector, model ETH-SP, from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti airMAX devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network.

The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.

  • Easy plug & play installation
  • Protects outdoor Ethernet devices
  • Compatible with 10/100/1000 Mb/s networks
  • 2 x RJ45 female connector
  • 5 kA (maximum) / 0.5 kA (normal)
  • RJ45 10/100/1000 Ethernet

NSM5 (4-Pack)

  • Atheros AR2313 S 180 MHz MIPS Processor
  • 16MB SDRAM, 4MB Flash Memory
  • 10/100 BASE-TX Ethernet Interface
  • 2 x 14dBi Dual Polarity Antennas
  • Over 32,808' Range
  • AirOS Software
  • External Status LEDs
  • FCC Part 15.247, IC RS210, CE Approved
  • RoHS Compliant

 

ETH-SP (4-Pack)

  • Protects Outdoor PoE Devices
  • ESD and Surge Protection
  • Compatible with Gigabit Networks
  • Two Ethernet Jacks