Ubiquiti PowerBeam 5ac 27dBi PRE-CONFIGURED airMAX ac Bridge 2-PACK PBE-5AC-500 long-range PtP CPE

PBE-5AC-500 US x2-PRE

Ubiquiti
Ubiquiti PowerBeam 5ac 27dBi 2-PACK ** PRE CONFIGURED ** airMAX ac Bridge 500mm, long-range PtP applications, innerFeed technology integrates radio into feedhorn of an antenna, support high data rates and dense modulation*READY TO INSTALL*

Model#: PBE-5AC-500 US x2-PRE

Sku: IT1970.5698.112250



MSRP: $559.99

In Stock

Your Price: $399.00




Model: PBE-5AC-500-US (2 Units) US Version

PRE-CONFIGURED / READY TO INSTALL

PowerBeam ac High-Performance airMAX Bridge 

The PBE-5AC-500 PowerBeam ac High-Performance airMAX Bridge from Ubiquiti Networks is suitable for CPE deployments requiring maximum performance. A dish reflector design with proprietary airMAX ac technology, offers improved latency, noise immunity, scalability, and significantly increased throughput performance of up to 450+ Mb/s and also offers wide range of 16+ mi (25+ km).

  • The InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance while eliminating cable losses. Ubiquiti's airMAX engine with custom IC improves TDMA latency and network scalability. 

The PowerBeam ac's enhanced beam directivity provides optimal performance in high-noise environments. The TDMA airMAX protocol enables optimal scalability, high throughput, and low latency in unlicensed, multi-point networks. It supports airMAX ac protocol and has a long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Integrated airMAX ac technology boosts the advantages of proprietary TDMA protocol. The mounting bracket of the PowerBeam offers 20° of uptilt and 10° of downtilt, while the mounting bracket offers ± 15° of tilt.

Incredible Antenna “Beam” Performance

The form factor of the PowerBeam™ ac features the highest gain for its size. The PowerBeam ac’s excellent beam directivity provides the best performance in high-noise environments.

Integrated Radio Design

Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses.

Advanced Software Technology

Ubiquiti’s airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.

Model: PBE-5AC-500 (2 Units) US Version

Product Features:

  •  Processor: Atheros MIPS 74Kc, 720MHz
  •  Memory: 128MB DDR2, 8 MB flash
  •  Networking interface: (1) 10/100/1000 Ethernet port
  •  Channel size: 10/20/30/40/50/60/80MHz (PtP) / 10/20/30/40MHz (PtMP)
  •  Protocol: 802.11AC
  •  Polarization: Dual linear
  •  Gain: 27dBi
  •  ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV
  •  Operating Temperature -40 to 70° C (-40 to 158° F)
  •  Operating Humidity 5 to 95% Non-Condensing
  •  Power Supply 24V, 0.5A Gigabit PoE
  •  Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
  • Max. Power Consumption 8.5W
  • Gain 27 dBi


Product Includes:

  • (2) Dish reflector (500mm)
  • (2) Radome
  •  (2) Antenna feed
  •  (2) Rear housing
  • (2) Dish bracket
  •  (2) Pole clamp
  •  (2) U-Bolt
  • (4) Flange nuts
  •  (2) Gigabit PoE Adapter (24V, 0.5A)
  •  (2) Power Cord
  •  Quick Start Guide